Categories
New Arrival
Best Sellers
Digital Sound Level Meter TES-1150
RM  638.13  606.22  
Special Promotions
More information on product
Sagging Tester
enlarge

Sagging Tester

Add to Compare
  Share This   Add To Facebook   Add To MySpace   
Part NoProduct NamePriceDetailsOptionsQty
ARIE 2225/1Sagging TesterKindly Contact Us For Price
Stock: Stock available
 
ARIE 2225/2Sagging TesterKindly Contact Us For Price
Stock: Stock available
 
ARIE 2225/3Sagging TesterKindly Contact Us For Price
Stock: Stock available
 
ARIE 2225/4Sagging TesterKindly Contact Us For Price
Stock: Stock available
 
ARIE 2225/5Sagging TesterKindly Contact Us For Price
Stock: Stock available
 

All prices/stock are subject to change so ensure that you contact us (+603-5621 5786) before ordering from us.

If stock is unavailable, the delivery/resupply terms is within 8 - 12 weeks.

ARIE 225 Sagging Tester produced by our company is in accordance with the specification of ASTM D 4400 and ASTM D 373. They are made of corrosion resistant stainless steel, the width of application is 75mm at 6mm per sagging thickness, and the gaps are being separated by a 1mm space as a marking on each sagging for distinctive identification of each sagging.
They are applicable to determine the relative sag resistance of a series of paints in order to provide the technical parameters for the paint application on site.

Main Technical Parameters

■ Clearance ranges

Ordering information

ARIE 225/1

ARIE 225/2

ARIE 225/3

ARIE 225/4

ARIE 225/5

RANGE

50-275μm

250-475μm

450-675μm

650-875μm

850-1,075μm

■ Difference between adjacent two notches25μm
■ Overall dimension120×20×20mmlength by width by height

■ Weight0.5Kg

Manual:

        Drawdown the coatings on a materialglass, test chart or boardusing the appropriates sagging Thickness Gauges, then place the coated material at vertical position90ºto the platformeg table.Allow 10 to 30 minutesdepending on the viscosityfor the coatings to sag under gravity. Check out the coating thickness without the sagging effect and the next coating thickness with the sagging effect. With that information, the recommended coating thickness is between the 2 layers of coatings.